i-Neighbour | Smart Community System

Warranty Terms & Conditions

The warranty is consequent to the purchase of i-Neighbour hardware.

The warranty is only valid upon legitimate demonstration of the i-Neighbour hardware purchase proof.

The hardware is warranted under normal use, against manufacturing defects for a period of twelve (12) months from original purchase date. The warranty is not applicable to any form of loss or damages that takes place with the hardware due to the following cases:

• Mishandling and improper maintenance of the hardware, and failure to obey operating instructions;

• Leaking batteries, sand, dirt or water damages;

• Electrical power surge, improper power and/or communication link connection and unstable power supply;

• Use of unauthorized components or services by other than our authorized agents;

• Serial number and/or warranty sticker is altered or removed.

• Unauthorized modifications, conversions or alterations to the equipment.

i-Neighbour holds no liability for loss or damages to the equipment that may occur during the transportation process.

The warranty does not cover payment of transportation charges or any other miscellaneous payments incurred for any send over of equipment to us.

Performance parameter
Working current	340mA
DC power supply	Class2;DC 5.2V@1A
Working power	2W,400mA@5V-The typical value
Barcode type	Standard 1D (Code 128, Code 39, EAN13, EAN8, UPC ect) ,2D bar code (PDF417,Data Matrix,QR ect)
Key scan times	5000,0000 times
System interface	USB
The data line length	1.5 meters
Scan Speed	200 scan per sec
Enviromental Parameter
Operating temperature	0C-40 C
Storage temperature	-40C-60C
Operating humidity	5%-95% Relative humidity,no condensation state
Electrostatic protection	+/-15kVDC Air discharge, +/-8kVDC Direct/indirect discharge
Fall-down test	50 order/1.5M;
Ambient light immunity	0-100.000LUX
Exercise tolerance	100mm/sec 13milUPC
IP Class	IP41
LED Safety Certification	IEC6247
CB	IEC60950
Integrated authentication	GOST-R(Russia),CE
EMI	Accord en50081,par1 specifications
EMC Electromagnetic compatibility	EN55022,EN55024 Class B
Dust	Seal to resist invasion of dust particles in the air.

1	a. Pair your iOS or Android devices with the bR301 smart card reader bR301, or b. if by using ACR38U (micro-USB) Smart Card Reader (Android only), you can skip the pairing Step1, go straight to Step 2.

2	Insert visitor's identity card into the smart card reader.

3	Visitor information will be extracted into your i-Neighbour account and here the registration is taken care of.

1	Management may set "ID field" according to their requirement in the visitor pre-registration form.

2	Security will scan the QR Visitor Pass by using smart phone (i-Neighbour App) or QSC10 QR Code scanner attached to PC (i-Neighbour Web)and read visitor's ID card using card reader.

3	Security can take appropriate measures if ID number does not match with the pre-registered ID number.